So what is a dental bridge? Well, essentially, it’s a permanent false tooth, designed to fill the space left by the loss of your own tooth and there three basic types on offer, though over time, they have evolved and become a lot more refined as new materials and techniques have been incorporated into the fitting process. A cantilever bridge is used where there are low stresses going through the mouth, generally at the front of the mouth and is anchored to one or more teeth only to one side of the new tooth. A resin bonded bridge is attached to the adjacent teeth either side of the hole with resin and wire. The more popular choice however is a fixed bridge the new tooth is molded between two crowns that is then cemented to the teeth either side of the gap. Getting a bridge is a lot simpler than having an implant, although in some cases you can combine the two for extra rigidity. Fitting normally takes a couple of visits, but your London dentist will usually fit it temporarily at first to give it a test run to iron out any problems. The only downside to having a bridge fitted is that they require extra attention to detail when it comes to cleaning to ensure bacteria is removed from under the bridge. But your dentist will advise you on how to do this and be able to supply you with small, inter-dental brushes.

More and more dentists in the UK starting to use Cerec technology for improved dental restoration and repair work. Cerec, also known as chair-side restoration, is a revolutionary new dental technology that allows dentists to design, manufacture and fix dental crowns, veneers and inlays in a single visit.

It works by using the latest digital x-rays and three-dimensional imaging to produce an instant representation of the patient’s mouth on the screen. This is incredibly accurate and, needless to say, far quicker than the old methods of traditional x-rays and dental moulds which could often take days to prepare.

Once the dentist has the image of the patient’s mouth, they are then able to set about designing the perfect dental restoration on the computer. This information can then be passed to a mill that is operated by a computer. The mill sculpts the tooth from a single piece of carefully matched porcelain in only a few minutes per tooth. This can all take place in a single appointment.

Your City of London dentist will then be able to fix the dental crown or veneer using dental bonding and a dental laser. Because these new porcelain restorations are made from a single piece of porcelain they are incredibly strong and as such, can be a lot thinner than they used to be. This limits the amount of preparation work needed by the teeth.

Cerec represents an incredible leap forward for dentistry. It is reducing appointment times and waiting lists for all patients and allowing dentists more time to focus on each patient in turn. If you are thinking of having veneers or need a crown replaced, speak to your dentist about the possibilities of Cerec.

The Inman aligner is a revolutionary orthodontic straightening device that has the incredible advantage of being able to straighten teeth in only six to sixteen weeks. Considering that some conventional braces can take up to two years of treatment to gain results, this really is a leap forward in straightening technology.

The Inman aligner also has other advantages over more traditional braces as it is completely removable. This means it can be taken out to clean teeth effectively and also for meal times meaning no food is off limits. More mature patients can also remove the aligner for important occasions such as an interview or presentation at work.

The Inman aligner is especially suited for patients with mild to moderate misalignment issues who previously may have resorted to veneers. This would have involved irreversible enamel removal that is not necessary with the Inman aligner. However, for patients with existing veneers or crowns, the Inman aligner can be used in conjunction with these treatments.

With some orthodontic treatments it is necessary to have regular uncomfortable tightening sessions with the dentist. This is not so with the Inman aligner, which only requires short fifteen minute check up appointments, with no tightening, every five weeks. The aligner works by creating room for the front teeth by moving the lateral teeth out using the power of a coiled spring. A metal bar along the front of the teeth (the only visible part of the brace when fixed in the mouth) straightens the front teeth discreetly and quickly.

The Inman aligner is the fastest acting brace on the market and since its introduction to this country has been very popular with teenagers and adults alike wishing to put the finishing touches to their smiles. Central London dentists are offering the Inman aligner for patients wishing to create the perfect smile without the hassle and irritation of traditional metal braces

There are a number of dental concerns that can benefit from veneers and crowns. Teeth that are chipped, cracked or broken can be reinforced and strengthened by the application of a crown. Veneers are often fitted after dental surgery such as root canals or fillings to secure any procedural work carried out. Veneers are now also commonly used to replace whole sets of teeth that are affected by discolouration or that are worn down or unevenly spaced. Veneers used to take several weeks to manufacture in laboratory conditions and as such were often prohibitively expensive. However with improvements in technology over the last twenty years it is now possible to design, manufacture and fix a whole row of veneers in only one sitting.

At the forefront of this incredible new technology is CEREC. It stands for CEramic REConstruction and is at the cutting edge of dentistry. It has eliminated the need for costly and uncomfortable dental moulds and x-rays. These procedures were also time consuming, adding days and weeks onto the manufacturing process. Now dentists are able to produce images of the patient’s teeth immediately using the latest in 3D imaging and digital x-rays. By creating three-dimensional representations of the patient’s teeth on the computer the dentist can then design a crown or veneer to microscopic degrees of accuracy.

The computer is then able to guide a milling machine in the actual fabrication of a crown or veneer. They can be milled form a single piece of porcelain in as little as six minutes and then fitted to the patient’s teeth immediately afterwards. CEREC veneers can be incredibly thin and also possess the translucent quality reminiscent of actual tooth enamel making them even more lifelike

CEREC technology is definitely the future of dentistry. By reducing waiting and treatment times it will bring down the cost and discomfort of most dental procedures whilst simultaneously improving the quality of treatment. The dental revolution starts here, ask you London dentist about CEREC technology.

As with other types of veneers, Empress Veneers are used to cover up a wide range of imperfections on visible teeth. For example, if your teeth have permanent stains from fluoride, coffee, or smoking, you may need to have veneers installed. In most cases, your City of London dentist will prepare your teeth for veneers, and then install them with a minimal amount of difficulty.

If you are planning to get veneers, you may find that Empress Veneers are the best ones available. Among other things, they are the only ones that will not develop stains. Therefore, if you smoke or eat foods that stain teeth, these will work best for your long term goals. At the very least, getting Empress Veneers may be a better solution than having your teeth whitened every few months.

You will also find that Empress veneers are very comfortable. These particular veneers are actually a porcelain shell, as opposed to to a slip of material that gets glued to your teeth. In many cases, you will find that they are a bit lighter, and do not require as much bonding surface.

Today, Empress veneers can also be used if you have broken teeth, or need to have their size changed for some other reason. For example, if a front tooth was fractured, you may be able to make use of a veneer instead of having the entire tooth covered with a crown. This will help preserve more of your natural tooth, as well as give you the maximum cosmetic benefit. As you may be aware, porcelain is still the best material when it comes to taking on shades of white that most closely match your other teeth. Therefore, if you need to have veneer installed, you may want to ask your dentist about Empress Veneers and their advantages.

If you happen to be in London and decide you want to have your teeth restored, there should be no problem as there are a number of dentists whom you can visit for any type of tooth restoration procedure you want.But first, you may need to know some basic facts about the tooth restoration process. This dental procedure involves the use of dental prosthetics which are specially fabricated for exact fit and utmost comfort. These dental prosthetics may include veneers, implants, crowns, bridges and dentures.

The fabrication process of the prosthetic itself is not done by your dentist, but by a qualified dental technician. In view of this, you may need to discuss with your dentist a few issues regarding the fabrication process and the dental technician or laboratory that will be handling it.

To attain the best results, it is essential for your dentist to:

1) Obtain accurate impressions of your dental profile through dental x-rays, imaging software, and dental models.
2) Communicate clearly with the dental technician regarding the specifications of your restoration procedure.

It is always imperative to have tooth restorations that you feel comfortable with because they fit well. As you know an ill-fitting dental prosthetic may not yield the best results and it may not even last for long. Bacteria may further lodge within an ill-fitting tooth restoration causing tooth decay.

Hence, it’s not only important to have a good dentist, but also to have a qualified and experienced dental technician for your tooth restorations. Dental technicians are mostly graduates of two-year associate degree programs although some may have finished bachelor programs. Those who are considered highly qualified have undergone advanced training and have several years of relevant experience.

So, if you’re new in London, the best thing to do is look around for some dental offices and make inquiries with regard to their tooth restoration procedures as well as the actual fabrication process involved.